Set Channel; Set Backlight - Retekess TR625 Manual Del Usuario

1. Press Menu to open menu options.
2. Press ∧ or ∨ button to scroll through menu to Set Alert Test, then press SELECT
3. Press MENU or OK button to exit the setting.

3.7 Set Channel

TR625 weather radio has 7 NOAA channels, and the broadcast frequencies are 162.400~162.55MHz.
1. Press Menu to open menu options.
2. Press ∧ or ∨ button to scroll through menu to Set Channel, then press SELECT
3. Press ∧ or ∨ button to choose a desired channel, then press SELECT
4. Press MENU or OK button to exit the setting.
Auto Search Setting:
1. Press Menu to open menu options.
2. Press ∧ or ∨ button to scroll through menu to Set Channel, then press > button to enter auto search mode
3. You will hear a beep sound while a radio station is found. Then press >button to search for the next station.
When a valid station is found, it will be stored.
4. Press MENU or OK button to exit the setting.

3.8 Set Backlight

1. Press Menu to open menu options.
2. Press ∧ or ∨ button to scroll through menu to Set Backlight, then press SELECT
3. Press ∧ or ∨ button to choose a desired value among BLT NORM, BLT ON and BLT OFF, then press
SELECT
4. Press MENU or OK button to exit the setting.
Backlight Type Description
BLT NORM
The backlight turns on whenever any button is pressed and will turn off automatically after 30s.
BLT ON
The backlight is always on.
BLT OFF
The backlight is always of
3.9 Set Button Beep
1. Press Menu to open menu options.
2. Press ∧ or ∨ button to scroll through menu to Button Beep, then press SELECT
3. Press ∧ or ∨ button to the desired mode between Beep On and Beep Off
4. Press MENU or OK button to exit the setting.
3.10 Set Alarm Event
All alarm event provided by this machine can be edited. If you turn off a certain type of alarm, the machine will
not sound on alarm when receiving this type of alarm information.
There are 4 options available: ALL ON, ALL DEFAULT, ALL OFF and EDIT EVENTS
1. Press Menu to open menu options.
2. Press ∧ or ∨ button to scroll through menu to Set Event, then press SELECT
3. Press ∧ or ∨ button to the desired option among ALL ON, ALL DEFAULT, ALL OFF and EDIT EVENTS, then
press SELECT to confirm
4. When the user need to edit event, press SELECT button when display EDIT EVENTS, then press ∧ or ∨
button to turn on or turn off the alert event.
5. Press MENU or OK button to exit the setting.
3.11 Set Data Copy
The radio supports copying data from one to another to make the radio settings easier. （Note：The time setting
cannot be copied, the user needs to set it in separate)
1. Connect 2 powered on radios with the dedicated clone cable
2. Press Menu to open menu options
3. Press ∧ or ∨ button to scroll through menu to SET DATA COPY, then press SELECT
4. DATA COPYING displays and it meaning cloning data now. The radio will beep after the data reception is
complete.
5. Removing the clone cable, and press MENU or OK button to exit the setting.
04