Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
garments, etc.) [Fig. 5].
Warning: the shot-steam function can only be used at high temperatures. Stop the
emission when the plate temperature control light (8) comes on, than start ironing again
only after the light has gone off.

DRY IRONING

To iron without steam, follow the instructions in section "steam ironing", leaving the
steam selector (3) on position "0".
Spray Function
Make sure that there is water in the reservoir. Press the spray button (5) slowly (for a
dense spray) or quickly (for a vaporized spray) [Fig. 6].
Warning: for delicate fabrics, we recommend moistening the fabric beforehand using
the spray function (5), or putting a damp cloth between the iron and the fabric. To avoid
staining, do not use the spray on silk or synthetic fabrics.
CLEANING
Please note: before cleaning the iron in any way, make sure that the appliance plug is
not connected to the socket.
Any deposits, starch residue or size left on the plate can be removed using a damp cloth
or an unabrasive liquid detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then wiped over with a dry cloth.
SELF-CLEANING
The self-cleaning feature cleans inside the plate, removing impurities. We recommend
using it every 10-15days. Directions:
- Fill the reservoir up to the maximum level indicated and set the steam selector (3) to
"0"
- Set the thermostat knob (9) to the maximum temperature and wait for the light (8) to
turn off.
- Pull the plug out of the socket and hold the iron horizontally over the sink.
- Hold the cleanout button (10) setting until all the boiling water, steam, impurities come
out [Fig. 7].
- When the soleplate has cooled down, you can clean it with a damp cloth.
HOW TO PUT IT AWAY
- Disconnect the plug of the iron from the socket.
- Empty the reservoir by turning the iron upside down and gently shaking it.
- Leave the iron to cool down completely.
- Roll up the power cord with the rewinder [Fig. 8].
- Always put the iron away in a vertical position.
- 16 -

Publicidad

Tabla de contenido
loading

Tabla de contenido