About This Publication; Package Contents; Tools Required - Allen-Bradley 2711P-RAK7 Instrucciones De Instalación

4 Adapter Kit for PanelView Standard and PanelView "e" Terminal Cutouts

About This Publication

This document provides instructions on how to mount the following devices into
existing PanelView Standard and PanelView "e" terminal cutouts.
• PanelView Plus 700-1250
• PanelView Plus CE 700-1250
Cat. No. This Terminal:
2711P-RAK7 PanelView Plus 700 Keypad
PanelView Plus CE 700 Keypad
2711P-RAT7 PanelView Plus 700 Touch
PanelView Plus CE 700 Touch
2711P-RAK10 PanelView Plus 1000 Keypad
PanelView Plus CE 1000 Keypad
2711P-RAT10 PanelView Plus 1000 Touch
PanelView Plus CE 1000 Touch
2711P-RAK12S PanelView Plus 1250 Keypad
PanelView Plus CE 1250 Keypad
2711P-RAT12S PanelView Plus 1250 Touch
PanelView Plus CE 1250 Touch

Package Contents

The cutout adapter kit includes:
• Cutout adapter plates with gasket and ball bearing spacers
• Adapter bars for plates with 3 or 4 holes
• 8 , 10, or 12, #10-32 nuts with flat washers, depending on number of studs in
adapter plate

Tools Required

The following tools are required for installation:
• Socket driver with 3/8 inch socket
• Slot or Phillips screwdriver
• Torque wrench capable of 17 lb-in
Publication 2711P-IN010C-MU-P - March 2007
Fits into Existing Cutout for:
PanelView Standard 900 Keypad (2711-K9xxx)
PanelView Standard 900 Touch (2711-T9xxx)
PanelView Standard 1000 Keypad (2711-K10xxx)
PanelView 1000e Keypad (2711E-K10xxx)
PanelView Standard 1000 Touch (2711-T10xxx)
PanelView 1000e Touch (2711E-T10xxx)
PanelView Standard 1400 Keypad (2711-K14xxx)
PanelView Standard 1400 Touch (2711-T14xxx)