Attaching Front Plate To Screen Using Vesa 75 Or 100 Mm Mounting Patterns - PEERLESS PARAMOUNT PA730 Instalación Y Ensamblaje

Attaching Front Plate to Screen Using VESA 75 or 100 mm Mounting Patterns

• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
Insert two M4 x 12 mm screws (A) into top two holes of
2
screen, leaving approximately .25" (6 mm) of exposed
thread. Hook screws onto keyslots of adapter plate as
indicated in figures 2.1 and 2.2.
*Note: If hole pattern is in a pocket, insert two M4 x 20
mm screws (B) with two retaining spacers (C) into top two
holes of screen as indicated right.
Insert two M4 screws (A or B) through bottom holes of
adapter plate as shown in figure 2.3.
FOR VESA ® 75
MOUNTING PATTERN:
fig. 2.1
All manuals and user guides at all-guides.com
WARNING
FOR VESA 100
MOUNTING PATTERN:
*For screens with
a hole pattern in a
pocket, spacers (C) go
between adapter plate
and screen.
Screen may appear
slightly different
than illustrated
fig. 2.2
fig. 2.3
5 of 20
ISSUED: 06-18-07 SHEET #: 095-9269-5 06-05-09
C
A
1/4"
ADAPTER
PLATE
A or B
ADAPTER
PLATE