Compaq Presario 5WV257 Manual Del Usuario página 9

All manuals and user guides at all-guides.com
English
5. From the Compaq Recovery CD Menu, select 2 (User Backup) by
pressing the number 2 key on your keyboard. The backup process
takes several minutes.
NOTE: If the hard drive partition does not have enough space to store the User Backup,
you may be prompted to increase the size of this partition. Answer Yes to complete the
User Backup. Be aware that drive C will be correspondingly reduced in size.
6. The CD tray opens automatically, and you are prompted to remove
the Compaq Recovery CD. Remove the CD from the CD-ROM,
CD-RW, or DVD-ROM drive.
7. Press Enter to restart your computer.
User Restore
IMPORTANT: You must have performed a User Backup at least once to use this option.
User Restore restores your system to the configuration saved the last time you
completed User Backup. The User Restore option is not used as often as User
Backup, and should only be performed when you need to restore your system to its
last User Backup condition.
To complete a User Restore, perform the following steps:
1. Insert your Compaq Recovery CD into your CD-ROM, CD-RW, or
DVD-ROM drive.
2. Turn off your computer by clicking the Start button; click on Turn
Off Computer. The Turn Off Computer dialog box is displayed.
3. Select Turn Off option, and the system powers down.
4. Turn on your computer by pressing the power button on the front of
your computer. The system reboots and the Compaq Recovery CD
Menu is displayed.
NOTE: If menu option number 3 says "No User Information found" this means that you
have not yet performed a User Backup. You are unable to perform a User Restore unless
you have performed at least one User Backup.
5. From the Compaq Recovery CD Menu, select 3 (User Restore) by
pressing the number 3 key on your keyboard.
6