Sony XBA-BT75 Manual De Instrucciones página 12

4
Select "XBA-BT" on the display
of the Bluetooth device.

If passkey* input is required on
the display of a Bluetooth device,
input "0000."
Pairing is complete when the
indicator (blue) flashes slowly (or
flashes twice).
* Passkey may be called "Passcode,"
"PIN code," "PIN number," or
"Password."

Start the Bluetooth connection
from the Bluetooth device.
This unit memorises the device as the
last connected device. Some Bluetooth
devices may connect with the unit
automatically when pairing is
complete.
Note
When pairing with a Bluetooth device that
cannot display a list of detected devices or
that has no display, you may pair the device
by setting both this unit and the Bluetooth
device to pairing mode. At this time, if
passkey is set besides "0000" on the
Bluetooth device, pairing cannot be done
with this unit.
Tip
To pair with other Bluetooth devices, repeat
steps 1 to 5 for each device.
1
GB