Silk’n SatinGlow H3301 Instrucciones De Uso página 19

8. If this is your first treatment - Choose the energy level. Silk' n SatinGlow offers 5 levels
of energy from 1 (the lowest) to 5 (the highest). To choose the right energy level for
your first treatment, test each treatment area separately.
» Place the treatment surface on the skin and press the pulse button to deliver one
pulse. If you did not experience abnormal discomfort press the + energy level
setting button once and deliver one pulse on a different spot at energy level 2.
» Continue testing at increased energy levels until you have reached the highest
level that you feel comfortable with. If within one hour you experience no adverse
effects, you can start your full treatment at that energy level.
» Repeat this test for each body part you intend to treat.
9. Set the energy level. If the energy level should be higher than the lowest, press the
energy level setting buttons using the "-" or "+" to respectively decrease or increase the
energy level, until the desired energy level is set and represented by 3 energy level
indicator lights (refer to section "9. 1 Energy levels").
10. Apply the treatment surface to the skin, making sure the skin is spread evenly and
smoothly. As soon as the treatment surface is in full contact with the skin, the ready
indicator light will start blinking.
11. Press the pulse button. The device will first determine the colour of your skin. If the
colour of the skin is light enough for safe application, the device will flash a pulse of
light onto your skin, and the ready indicator light will turn off.
» You will see a bright flash of light and simultaneously hear a subtle pop sound,
which is a normal noise for the device. You will feel a mild sensation of warmth and
tingling. Silk' n SatinGlow will immediately recharge for the next pulse.
» After 3.5 seconds the ready indicator light will turn on again.
17
EN