Warning
Do not use Silk' n
SatinGlow on tanned
skin or after recent sun
exposure (including
artificial tanning
machines).
Do not expose treated
areas to the sun.
Never use Silk' n
SatinGlow around or
near the eyes.
Possible Result
Treating with Silk' n SatinGlow
before or after any sun exposure
can result in adverse effects such
as redness and skin discomfort.
Tanned skin particularly following
sun exposure, contains large
quantities of the pigment Melanin.
This applies to all skin types and
complexions, including those
which don't seem to tan quickly.
The presence of large quantities
of Melanin exposes the skin
to higher risk when using any
method of light based hair
removal.
Although, Silk' n SatinGlow can
be used for the treatment of facial
hair, extra caution should be used
on the face to avoid the eyes.
Possible hazardous optical
radiation is emitted from
this device. Do not look at the
operating lamp. Eye
injury may result.
7
Safety Tip
Avoid exposure to the sun for 4
weeks before your Silk' n SatinGlow
treatment!
Sun exposure includes
unprotected exposure to direct
sunlight of over 15 minutes
constantly, or unprotected
exposure to diffused sunlight of
over 1 hour constantly.
To protect recently treated skin
when exposed to sunlight, be sure
to thoroughly apply sunscreen SPF
30 or higher, for 2 weeks after each
hair removal session.
Silk' n SatinGlow has a built-in
safety feature for eye protection.
It has been designed so that a
light pulse can not be emitted
when the treatment surface is
facing open air. The safety button
enables treatment only when the
treatment surface is in contact with
the tissue.
EN