Silk’n SatinGlow H3301 Instrucciones De Uso página 22

9.3 Pulsing and gliding
EN
Pulsing is the best technique for working at higher energy levels.
U
Press the treatment surface against your skin. Work in rows (either across or down as
shown in the image). Start at one end of each row and progress to the other end.
U
The treatment surface creates temporary pressure marks on the treated area so you
can see areas you have treated.
U
After each pulse, move the treatment surface to the next spot. Keep doing this
pulsing action for the area you are treating.
U
Avoid gaps or overlaps as you use the device.
Gliding is the best technique for working at lower energy levels.
U
Press the treatment surface firmly against your skin and slowly glide over your skin
(either across or down as shown in the image). Make sure that the treatment surface
is always touching your skin.
U
At lower energy levels, the device takes only 1-3.5 seconds to recharge between
pulses. This generates a nonstop sequence of flashes.
U
Glide at a speed so that you avoid gaps or overlaps.
20