Silk’n SatinGlow H3301 Instrucciones De Uso página 21

U
Level 3: Both left and central indicator lights are steadily lit.
U
Level 4: The left and central indicator lights are steadily lit and the right indicator
light is blinking.
U
Level 5 (highest): All 3 indicator lights are steadily lit.
Whenever Silk' n SatinGlow is turned on its energy level will automatically be reset to the
lowest energy level. Only one energy level indicator light will be on.
To set the energy level, press the energy level setting buttons using "-" or "+" to respectively
decrease or increase the energy level.
9.2 Skin colour sensor
Light-based hair removal on darker skin tones can result in adverse effects such as burns,
blisters, and skin colour changes (hyper- or hypopigmentation).
To prevent such misuse, a unique skin colour sensor in Silk' n SatinGlow measures the treated
skin complexion at the beginning of each session and occasionally during the session. If
the skin colour sensor detects a skin tone that is too dark for Silk' n SatinGlow application, the
device will automatically stop emitting pulses.
If you see no light pulse and the skin tone warning indicator light blinks, this is an indication
that your skin tone, measured by the skin colour sensor, is too dark for safe application. Try
using the device on a different body part, or contact Customer Service.
19
EN