JENN-AIR JXT9130CDP Guia De Instalacion página 10

All manuals and user guides at all-guides.com
CONVERTIBLE OPTIONS
3 1/4"x10" Rear Discharge
1. At rear of range hood, remove all screws on pre-
mounted rear rectangular cap and remove cap.
3. Mount rectangular transition piece at opening with
gasket as shown.
5. Mount starting collar (provided) at rear discharge
opening with gasket.
INSTALLATION
2. Remove top pre-mounted transition piece. Leave
attached gasket in its original place.
4. Mount rectangular cap (previously removed) on top
of transition adaptor.
8