Bestway HYDRO-FORCE 65352 Manual Del Usuario página 4

6
Extended exposure to sun can shorten the lifespan of your SUP.
We suggest not leaving SUPs in direct sunlight for more than 1 hour after use.
Maintenance and storage of the SUP
1. Disassemble the fin (Fig 1).
2. Deflate the SUP by pushing on the pin and rotating clock wise. (Fig 2).
3. Fold the SUP, but not more than 10 cm every time (Fig 3).
4. Pack the SUP (Fig 4).
5. Insert the SUP in bag (Fig 5).
1.
Store in a cool, dry place and out of children's reach. Do not unfold this product
when the temperature is low. The product should be room temperature
(over 20°C) for 24 hours before inflation.
Repair
1. Deflate the board (Fig 1).
2. Clean around the surface around the leak (Fig 2).
3. Cut the repair patch to the suitable size (Fig 3).
4. Apply the glue and patch on the damaged surface (Fig 4).
5. Press the repair patch for 30 sec (Fig 5).
6. Wait 24 hours before use (Fig 6).
1. 2.
All manuals and user guides at all-guides.com
2. 3.
3.
7
4.
4. 5.
4
5.
6.
30
24h
Sec