Trevi TT 1064 E Instrucciones De Uso página 29

ENCODING FROM TAPE TO USB / SD CARD DEVICE
1. Set the "FUNCTION" selector to "TAPE" mode. TAPE be playing.
2. Plug or slot in USB / SD card device to the port.
3. Press the "BIT RATE" button and press the "SKIP +" or "SKIP -" button to choose the desired bit
rate. Press the "BIT RATE" button again to confirm.
4. Press the "REC" button twice, the display will show "REC" and flash. Appliance will start
recording. Press the "STOP" button to complete.
ENCODING SINGLE SONG FROM USB TO SD CARD DEVICE AND ENCODING
FROM SD CARD TO USB DEVICE
1. Set the "FUNCTION" selector to "CD" mode.
2. Plug or slot in USB / SD card device to the port.
3. Press the "USB / SD" button on the remote control to choose the desird media to play.
4. Press the "REC" button, the appliance will start recording from the beginning to the end of the song.
ENCODING ALL SONG FROM USB TO SD CARD DEVICE AND
ENCODING FROM SD CARD TO USB DEVICE
1. Set the "FUNCTION" selector to "CD" mode.
2. Plug or slot in USB / SD card device to the port.
3. Press the "USB / SD" button on the remote control to choose the desird media.
4. Press the "STOP" button to stop the auto playback.
5. Press the "REC" button, the appliance will start recording from the beginning to the end of all song.
ENCODING FROM PROGRAMMED TRACK TO USB / SD CARD DEVICE
1. Select desired track into the program memory.
2. Press the "REC" button, the appliance will start recording all the programmed track.
RECORD OPERATION