Safety At The Workplace; Use; Maintenance; Product Identification - CAMPAGNOLA 94 Manual De Uso Y Mantenimiento

2.2.1

Safety at the workplace

• Use the tool only in good visibility conditions. A dark work area could cause accidents. Do not use in low light condi-
tions, such as in the dark in closed or open environments, at night, at sunset, at dawn, with dust / sand in the air that
prevents clear visibility from less than 2 meters. To check whether the visibility is acceptable, put the tool at 2 meters
with visible labels, which must be clearly read.

Use

• Use the tool only for the purposes described in par "Product description". Any other use could cause injuries and is
expressly forbidden by the Manufacturer.
• Do not use the tool if it is damaged, wrongly adjusted or not completely assembled.
• Wear protective glasses or a visor, safety shoes, anti-vibration gloves and a noise-abatement headset (par. 2.8).
• Keep a safe and stable working position, which guarantees a perfect balance (i.e. flat and dry surfaces).
• Do not leave the tool in the rain. Keep it in a dry place.
• Do not use accessories other than those supplied by the Manufacturer. Failure to comply with this requirement can
cause serious damage to the tool and the user.
• When the tool is connected to the air supply, but it is not being used, make sure the safety catch (7) on the handle (6)
automatically engages itself
• If a telescopic extension pole (16) is being used, make sure that the clamp (18) is holding it firmly before starting work.
• Always check that the safety devices are perfectly efficient.
• Always hold the tool with both hands and make sure you are in a stable and safe work position.
• The operator will become very tired using the tool for long periods. For this reason it is recommended that the operators
swap shifts regularly and each person uses the tool each day only for a short time.
• When the tool is not in use, disconnect the air hose and store it in a clean and dry place.

Maintenance

Before performing any maintenance operations or adjustments on the mechanical parts of the equipment, put on
heavy-duty work shoes, protective gloves and goggles.
• Routine maintenance and repairs can be carried out only by an operator with the necessary physical and intellectual
qualifications, as defined by the employer.
Special maintenance and repairs can be carried out only by a qualified mechanic.
•
• Before any adjustment or maintenance operation, disconnect the tool from the power source.
• Keep bystanders at least 2 meters away, when servicing or repairing the machine.
• Only qualified mechanics are authorised to inactivate the tool safety devices, if any, when special maintenance is to
be performed. It is their responsibility to safeguard the operators and the machine and to re-activate the safety devices
as soon as maintenance work has been completed.
• All maintenance procedures not dealt with in this manual are to be performed at CAMPAGNOLA Authorised Service
Points.
• When maintenance or repairs have been completed, the machine can be started again only if duly authorised by the
qualified mechanic. The service mechanic must make sure:
- work has been completed;
- the machine runs in a trouble-free manner;
- the safety devices are activated;
- no one is working on the machine.

Product identification

A CE identification plate / label is applied to each machine / tool (Picture 1).
Model, serial number and year of manufacture are shown on the Manufacturer's CE plate. The CE plate is applied
on the machine / tool and shows the following data and symbols:
1) Compliance marking according to the 2006/42 / CE directive.
2) Company name and full address of the Manufacturer / Constructor.
3) Mandatory prescription for all personnel being responsible for the use and / or maintenance of the machine / tool
as per the corresponding use and maintenance manual.
4) Machine / tool designation.
5) Type of machine / tool - Designation of the type / code of the machine / tool.
6) Serial number.
7) Year of construction, i.e. the year in which the manufacturing process was completed.
8) Information pursuant to the 2012/19 / EU "WEEE" Directive: Electric and electronic waste may contain substances
that are dangerous for environment and human health. Therefore, they must not be disposed of with the household
waste. They must be carried to a waste collection center to be collected separately.
Use and maintenance manual – Translation of
original Instruction.: 01, Date 17/01/2022
Page 21