aqprox appPCI300 Guía De Usuario página 54

300Mbps Wireless N PCI Adapter – APPPCI300
WPA/WPA2: Wi-Fi Protected Access
WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase
802.1x: Enables 802.1x security.
Pre-Shared Key (Static WEP): Enables the use of shared keys that are defined on both
the access point and the station. To define shared encryption keys, choose the Shared Key
radio button and click Configure to fill in the Define Shared Keys window (shown in Figure
3-5).
None: No security (not recommended
Note:
If the access point which the Adapter is associated has WEP set and the client has WEP enabled
make sure that Allow Association to Mixed Cells is checked on the Security tab to allow
associati on. To complete WEP encryption configuration, you must select the 802.11
Authentication Mode as appropriate on the Advanced tab of this Profile Management dialog.
To configure the Encryption Keys under the Pre-Shared keys (Static WEP) Security mode:
User's Guide
Figure 3-4
).
English
,
53