Metra 99-5815 Instrucciones De Instalación página 10

Kit Assembly 99-5815
Stacked ISO mount unit provision
3. Attach the double DIN brackets to
the radio housing.
Note: The notch in the housing
should be on top. (Figure 3A, 3B)
4. Slide the ISO mount units into
the radio housing/bracket
assembly and secure the units to
the assembly using the screws
supplied with the units. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly.
(Figure 3A)
(Figure 3B)
(Figure C)
10
Notes