Cleaning The Hood - De Dietrich DHD9001X Manual De Utilización

4/ CLEANING THE HOOD

Careful maintenance helps guarantee proper operation and good results from an appliance over time.
The hood must be unplugged from the electrical power source, both by unplugging the
appliance from the socket as well as de-activating the breaker, before removing the metal fil-
ters. After cleaning, you must replace the metal filters as outlined in the instructions.
MAINTENANCE
External Do not use metallic scrubbers,
surfaces and
abrasive products, or hard bru-
accessories
shes.
Filter cartri- After 30 hours' operation, the button
dge pad will signal that the grease filter is
saturated by flashing the 4 speed LEDs.
Press the timer button to reset .
Active In the recirculation mode, you must
carbon filter substitute the active carbon filter pe-
riodically. To remove the fibre panel
you must first remove the anti-grea-
se grill and pull the plastic knob on
the panel itself, removing it from its
housing. To replace the active car-
bon filter, do the reverse. Replace
the used carbon filter on an average
of every six months.
To preserve the appliance we advise you to use Clearit maintenance products.
Clearit offers appropriate professional products and solutions for the day-to-day maintenance of your hou-
sehold appliances and kitchens. You will find these products on sale at your usual retailer together with an
entire line of accessories and complementary products.
HOW TO PROCEED?
Clearit The experience of
professionals at your service
ACCESSORY PRODUCTS TO USE
To clean the external surfaces of the
hood and the light housing screen use
only commercially available household
detergents diluted in water. Then rin-
se with clean water and dry with a soft
cloth.
The grease filters can be washed by
hand or in the dishwasher. These
filters need to be cleaned on a regu-
lar basis because otherwise they may
present a fire risk. Refit the grease
filters and front panel, making sure
that the panel is properly fitted at
the sides so that it does not cause
the downdraft to stop operating.
36
EN