Asus WL-169gE Manual Del Usuario página 18

2. Automatic Generation. -.Type. a. combination. of. up. to. 64. letters,.
numbers, or symbols in the Passphrase box, the Wireless Settings Utility
automatically uses an algorithm to generate four WEP Keys.
Select one as your Default Key
The Default Key field allows you specify which of the four encryption keys is to
use for transmitting data over wireless LAN. You can change the default key
by clicking on the downward arrow, selecting the number of the key you want
to use, and clicking the "Apply" button. If the access point or station with which
you.are.communicating.uses.the.identical.key.by.the.same.sequence,.you.can.
use.any.of.the.keys.as.the.default.on.your.WLAN.Card.
Click the "Apply" button after you have created the encryption keys, the
Wireless Settings Utility uses asterisks to mask your keys.
Config - Authentication
This tab allows you to set the security settings to match those of your AP. It is
configurable only if you have set Network Authentication to WPA or WPA2 in
Config-Encryption tab.
Authentication Type
The authentication type methods include:
PEAP: PEAP (Protected Extensible
Authentication. Protocol). authentication.
is a version of Extensible Authentication
Protocol (EAP). EAP ensures mutual
authentication between a wireless client
and a server that resides at the network
operations.center.
TLS/Smart Card: TLS (Transport Layer
Security) authentication is performed to
create.an.encrypted.tunnel.and.achieve.server-side.authentication.in.a.manner.
similar to Web server authentication using Secure Sockets Layer (SSL) protocol.
This method uses digital certificates to verify the identity of a client and server.
TTLS: TTLS authentication uses certificates to authenticate the server, and
a simpler method to authenticate the client, all the while maintaining similar
security properties to TLS like mutual authentication and a shared secret for
session.WEP.key.
Quick Start Guide
ASUS WLAN Card 1