Assembly Instructions for Table-top Console
NOTE: You must install the Acrylic TV Stopper to prevent the TV from tipping when
placing your flat panel television directly on the console.
20. If necessary, adjust the pre-attached FLOOR LEVELERS at the bottom of FRONT FRAME (C) to
level the unit.
21. Remove the tape of the ACRYLIC STOPPER (15) and place it in the cut-out of the ACRYLIC
STOPPER TEMPLATE on the front of the TOP GLASS (K). Make sure it is properly aligned
before applying pressure.
22. Remove the ACRYLIC STOPPER template carefully.
All manuals and user guides at all-guides.com
C
13
15
15
ACRYLIC STOPPER
(1 used in this step)
⑮