Whalen 3-in-1 Manual Del Usuario página 7

F
UP
5/8" BOLT
(4 used in this step)
③
4. Align the end wood dowels on the LEFT SIDE PANEL (E) with the pre-drilled holes of the
FRONT FRAME (C) and press them together. Make sure the top edges are even with each
other and the Hinge Bases face inward. Securely screw two 5/8" BOLTS (3) with WASHERS
(7 and 8) through the metal brackets on the TOP SHELF FRAME (A) and then into the
threaded inserts on the LEFT SIDE PANEL (E).
5. Secure the LEFT SIDE PANEL (E) to the BOTTOM METAL FRAME (B) with two 1" BOLTS (4).
Tighten all the bolts with the HEX WRENCH provided making sure there are no gaps between
the Left Side Panel (E) and Front Frame (C).
6. Repeat the same procedure to attach the RIGHT SIDE PANEL (F) on the other side.
All manuals and user guides at all-guides.com
Assembly Instructions
UP
A
B
F
1" BOLT
(4 used in this step)
E
E
LOCK WASHER
(4 used in this step)
④
⑦
7
FLAT WASHER
(4 used in this step)
⑧