Whalen 3-in-1 Manual Del Usuario página 14

Assembly Instructions for Table-top Console
Tools required: Hex wrench (provided), Phillips screwdriver, Mallet, Power Drill, and 3/8" Drill Bit.
23. Position the assembled console at the desired location against a wall. Now, follow the instructions
printed on the plastic bag containing the TIPPING RESTRAINT HARDWARE to mount the tipping
restraint to the back rail and the wall.
NOTE: YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE WALL,
TO PREVENT TIPPING, CAUSING ACCIDENTS AND/OR INJURIES.
24. The console is now ready for use. Be sure to position your Flat Panel TV in the center of the
console, behind the ACRYLIC STOPPER.
NOTE: If you choose the Wall Mounted configuration, proceed to PAGE 23.
All manuals and user guides at all-guides.com
14