Whalen 3-in-1 Manual Del Usuario página 25

44. Attach the MONITOR BRACKETS (O) to the back of the television following steps 29 and 30, or
31 and 32, depending on the type of TV that you own. Once the MONITOR BRACKETS are
attached onto the back of television, ask for assistance to lift the television up to attach the
MONITOR BRACKETS onto the MOUNTING FRAME (N). Place the hooks of the Monitor
Brackets over the Mounting Frame and then lower them onto the bars of the MOUNTING FRAME.
Loosen the lock bolts pre-attached on the MONITOR BRACKETS to ensure an easy fit at the
bottom hooks. Proceed to center the television. When the TV is in its intended position, tighten
both lock bolts with a long Phillips screwdriver until they hit the underside of the MOUNTING
FRAME (N). This will ensure the TV is safely secured to the wall.
45. Place the assembled console under your TV. Finally, connect the A/V and power cables to your
TV. You are now ready to enjoy your wall-mounted Flat Panel TV.
All manuals and user guides at all-guides.com
Assembly Instructions
25