Buttons; Mode Switch - Roborock H7 Manual Del Usuario

Buttons

Sustain
Press the Sustain button to enter Sustain mode. The Sustain
icon will be highlighted on the screen. Squeeze the trigger
while in Sustain mode to start the vacuum and enable it to run
continuously. In Sustain mode, the vacuum will not stop when the
trigger is released. Press the Sustain button again to disengage
Sustain mode and stop vacuuming.
You can also enable the vacuum to continuously run by first
pressing the trigger and pressing the Sustain button.
Pressing the Sustain button for 5 seconds will activate the child
lock. The vacuum will not start when the Child Lock is on. Press
the Sustain button again for 5 seconds turn the Child Lock off.
Notes:
• Squeezing the trigger while the vacuum is already running continuously in Sustain mode
will have no effect.
• Pressing the Sustain button for 2 seconds in any active mode will stop the vacuum.
Trigger
Squeeze the trigger to start vacuuming.
Releasing the trigger will stop the vacuum and enter it into
Standby mode, unless it is in Sustain mode. The screen will turn
off automatically after 30 seconds of inactivity and the vacuum
will automatically turn off after 1 minute of inactivity. Squeeze the
trigger to start the vacuum again.
Notes:
• Pressing the Sustain button while Sustain mode is on will switch off Sustain mode.
• The vacuum will stop running when charging.
• Insufficient power or other errors may cause the vacuum to fail. See Troubleshooting for
details.

Mode Switch

When the vacuum is on, press the Mode button to switch
between Eco, Standard, or MAX modes. The respective icon will be
highlighted on-screen.
Note: The vacuum will return to Standard mode after turning off or when charging.
012