Costway BabyJoy BB5645 Manual Del Usuario página 5

How To Install
Specification: 2.0 m
1. Connect the upper male pipe (A1) and the upper female pipe (A2),
the ball will pop out of the slot, indicating that the connection is in place.
Note: The upper male pipe and upper female pipe are wrapped
in foam.
2. Connect the lower male pipe (B1) and the lower female pipe (B2), the ball will
pop out of the slot, indicating that the connection is in place.
3. Connect the two rear tubes with the connecting block.
4. Install the rear tube assembly into the L legs with the corner connection.
8
How To Install
5.Put the cloth cover into the upper and lower tube assembly (the zipper facing
outwards), and insert the upper and lower tube assembly into the left and right
support tubes at the same time, and pull the zipper.
9