Fault phenomenon
Noise at work
It is difficult to
unscrew the juicing
body cover after
juicing
Note:
The above are analysis and resolution of common faults. As for other faults,
please contact with our Customer Service Department. Be sure not to take apart
or repair by yourself.
Analysis of causes
1. The auger and fine
strainer are not fully
installed, resulting in
unsteady operation.
2. The start motor in the
machine body breaks
down.
3. It sounds a little noisy
when some ingredients
are juiced.
1. There is oil stain on the
surface of the juicing
body cover;
2. The ingredients in the
juice net are not juiced
completely.
14
Fault resolution
1. Fully install the auger and
fine strainer.
2. Please contact with our
Customer Service
Department.
3. The food itself has a
rubbing sound, which is
normal.
Clean the surface of the
juicing body cover;
2. Continue to turn on and
juice the ingredients
completely or long press the
reverse button for a few
seconds to rotate the
ingredients out of the juice
net.