Serial
Part name
number
7
Pusher
8
Hopper
9
Juicing body
10
Auger
Fine strainer
11
(with screen
inside)
Juicing body
12
cover silicone
loop
Juicing body
13
cover
Function introduction
When ingredients are placed, gently push the
ingredients so that the ingredients are in full
contact with the auger to increase the juicing
efficiency.
It is mainly used to store juiced ingredients.
It is the main parts of juicing. The ingredients
are put in from the inlet on top of the juicing
body, and discharge the juice and pomace
through the juice outlet and pomace outlet.
It is the main parts of juicing, which is used to
convey the ingredients and grind the
ingredients by running in with the fine strainer.
Run in with the auger to grind the juiced
ingredients and filter out the juice.
It is placed at the joint between the juicing body
and the juicing body cover (to prevent juice
from flowing out from the joint) and also to
adjust the tightness of the juicing body and the
juicing body cover.
The main components of juicing connect the
juicing body to play a role in security
protection.
07