Method of Application
Before using this product for the first time, please thoroughly wash parts that
touch with foods (see "Maintenance and Preservation")
I. Product Usage
Follow these steps to install and use the product:
Keys operation instructions:
• ON: normal operation key
• OFF: Close, stop
-Reverse: Used when the pomace discharging is not smooth
or locked.
Hint: When the flushing off of the pulp is unsmooth or the
motor is stuck, please turn off the appliance, press and hold
the "Reverse" key for about 3 sec, the spiral motor starts to
reverse, then release the "Reverse" key to stop the reversion;
Press the "ON" key to continue the normal process.
Connect the juicing body to the machine body:
1. Put the central position of the inlet of the juicing
body to align the position of "unlocking sign" on the
machine body (the three fasteners of the juicing body
1
will be aligned).
2. Then rotate counterclockwise, and when you hear a
"tick" sound, it shows that the juicing body is fully
connected.
Align the auger's hexagonal axis with the hole in the
2
machine body and push it horizontally to the bottom.
(If it is not aligned, slightly align by rotating the auger)
Put the larger end of the fine strainer in from the end of
the auger, and align the three fasteners of the fine strainer
3
to the three fastening slots in the juicing body. (The fine
strainer is only used in conjunction with the juicing
button on the back, and this function is used for juicing)
08