Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Use of lithium-ion rechargeable
1
battery
Before using the laser for the first time, insert
the battery in the device and fully charge (at least
4 hours). Connect the battery charger to charge
the battery. The LED of the battery pack lights
red while the battery is charging. When the LED
changes to green, charging is complete. When
the backlight of the circular level flashes, the
battery is low. In that case, recharge the battery.
The rechargeable battery can either be charged
when it is not inserted in the device or when the
device is in use.
– The battery may only be charged with the battery charger provided
and used only in this laser device. Any other use may cause injury
or fire.
!
– Make sure there are no conductive objects in the vicinity of the
battery contacts. Short-circuiting of these contacts can cause burn
injuries or fire.
– Do not open the rechargeable battery. This could cause short-circuits.
Horizontal and vertical levelling
2
Turn the transport fastener (2) clockwise and release the pendulum lock.
The lasers are now automatically aligned by the pendulum system and the
horizontal laser lights constantly. The lasers can be switched on and off
individually with the H and V buttons. It is now ready for levelling in the
horizontal or vertical plane.
If the device is too far off the horizontal (more than 2°), the lasers will
!
blink. Align the device using the adjustable feet (7) or place on a more
level surface. The round vial (9) is provided as an aid to alignment.
PowerCross-Laser 5G DLD
13
GB
Publicidad
