Make sure that your child is always securely harnessed when using the
buggy.
Adjust the harness straps until they sit
snug and tight on the child.
Slide the belt adjusters up or down to
adjust the length of the harness.
You will have to adjust the lengths of the
shoulder straps periodically as your child
grows. Thread the harnesses out of the
openings in the backrest (03) and thread
them back through the openings (03)
matching your child's size.
Always make sure to thread the right and
left shoulder harness into an opening of
the same height.
Make sure that the plastic anchors at the ends of the harnesses are threaded
tightly through the openings (03) and that the harnesses are not twisted.
Test for correct adjustment by tugging on the shoulder harnesses with
moderate strength.
Ensure that none of the harness straps are twisted.
The child safety lock is located on the back of
the harness lock.
It can be activated and deactivated by simply
turning it. The activated child safety lock
blocks the opening mechanism of the harness
lock.
WARNING!
• Only use the shoulder and lap harness in combination with the central
harness.
23
manual_QUIX_130315-WEST-final.indd 23
17.06.13 16:25