Civco C-Qual Guía De Referencia página 5

C-Qual™
2. Position tilting board:
WARNING
Ensure tilting board is fixed properly before placing patient.
l
For 5°, 7.5°, 10°, 12.5°, 15° angles lift low angle support and secure
tilting board into appropriate location.
3. Position head support as needed (H1- H5).
4. Slide or lift on bottom stop to achieve appropriate location (B1- B13).
5. Adjust upper arm support position:
Loosen upper arm support lower knob to rotate
arm support to desired location (A- P).
For 17.5°, 20°, 22.5°, 25° angles lay low angle support onto lower board.
Separate high angle support from tilting board and select appropriate
Slide upper arm support for appropriate horizontal
position (T- Z). Tighten upper arm support lower
knob.
3
location along lower board.
Loosen upper arm support upper knob. Adjust angle of arm support by
moving knob along curved scale to appropriate position (1- 12).
English
I. Sure- Set Angulation -
Low Angle Support
II. Sure- Set Angulation -
High Angle Support
Tighten knob.