Installation Instructions; Special Instructions - Pentair 320 Serie Manual De Instrucciones

LIFEGARD CHLORINATOR EXTENSIONS SOLVE THE ABOVE PROBLEMS BY:
1. Increasing tablet capacity.
2. Larger chamber size allows more erosion of tablets. (See special instructions below)
The 10" extension doubles and the 20" extension triples (approximately) the capacity and time
between refills. *AVAILABLE THROUGH LIFEGARD DEALERS ONLY.
NOTE: On free standing #300 series chlorinators, the base of the chlorinator should be secured to
prevent the possibility of the chlorinator tipping over due to increased height.

INSTALLATION INSTRUCTIONS

1. Follow recharging instructions to the point of filling with tablets
2. Making sure O-Ring is clean, lubricated with Lifegard Silicone and in place, screw on extension
tightly and secure with lock screw. (You may wish to wait until back in operation before tightening
screw to insure against leaks).
3. Fill with tablets and continue with normal recharging procedure.

SPECIAL INSTRUCTIONS:

The large chamber size will result in more chlorine being dispensed at the
same valve setting, therefore, once installed, several days monitoring will
be necessary to readjust chlorinator output.
*Does not apply to large capacity #300-19 or #300-29.
Parts Breakdown Drawing
Item Quantity Part No. Description
1 1 R172078 Lockscrew (bottom collar)
2 1 R172009 O-Ring
E X T E NS IONS
• Going on vacation?
• Need more chlorine?
• Filling Chlorinator/Brominator too frequently?
# R 1 7 2 0 8
10" Chlorinator extension complete
7 # R 1 7 2 2 8 3
20" Chlorinator extension complete
R24054-1200