Format Memory Card; Auto Power Off - Num'axes PIE1052 Manual De Instrucciones

− Press the MENU button then select "Delete" and press OK.
− Select "One" (delete the selected photo/video) or "All" (delete all photos/videos) then press OK.
− If your selected "One", "Delete This File?" will appear on the screen, select "Yes" or "No" then press OK.
− If you selected "All", "Delete all files?" will appear on the screen, select "Yes" or "No" then press OK.
− Press MENU to exit.

8.5. Format memory card

− Slide the switch to the SETUP position.
− Press  to enter playback.
− Press the MENU button then select "Format" and press OK.
− Select "Yes" or "No". If you selected "Yes", "Are you really sure?" will appear on the screen, select "Yes" or "No"
then press OK.
− Press MENU to exit.
8.6. Webcam
When the camera is connected via USB cable; the LCD screen displays "MSDC". Press MENU once, "MSDC" turns to "PC
Cam", the camera now can be used as a PC camera. Press MENU again, the camera exits the PC camera mode.

8.7. Auto power off

In SETUP mode, the camera will automatically power off if you don't press the keypad for more than 3 minutes. Slide the
switch to OFF then back to SETUP if you want to do some further configuration.
8.8. How to customize the camera settings?
To enter the camera setting menu, slide the switch to the SETUP position (the LCD screen will light up) then press the
MENU button once.
You can navigate the setting interface by pressing , ,  or . Press OK for selection, press MENU to exit to the previous
page, and press MENU to switch alpha/digits/symbols.
NOTE: For some settings, you need to press MENU to save and exit the configuration after pressing OK to confirm (Camera
ID, Time Lapse, Timer, Password).
The settings presented below can be made directly on the LCD screen of the device but also in the free mobile application
available on Android and iOS (application name: PIE Cloud).
Cam
Camera mode
Image resolution
Multi-shot
Video resolution
Night mode
Set
OK
Cam
Settings
Camera mode
PIR Other
Photo
8M
1P
HD
MENU Exit
Programmable options (default settings in bold characters)
Photo | Video | Photo + Video
− Photo: the camera shoots only photos based on the configured and "Photo
resolution" and "Multi-shot" settings.
− Video: the camera shoots only videos based on the configured "Video resolution"
setting.
− Photo + Video: upon the same trigger event, the camera shoots photo(s) first then a
video based on the configured "Photo resolution", "Multi-shot" and "Video
resolution" settings.
Guide d'utilisation PIE1052 – indice B – Février 2022
Cam
Flash power
Camera ID
GPS
Sendings/day
Set
OK
PIR Other
High
OFF
ON
Unlimited
MENU Exit
23/72