Control Panel - NUTRIBULLET Juicer Pro Manual De Instrucciones

8
Pulp Basin
When the is
completely full, it must be
emptied before continuing
juicing. See disassembly
instructions.
10
Remove the Juice Pitcher
from under the spout. You
Juice Pitcher
may close the
Lid
and store juice in the
Pitcher if desired.
NOTE:
To do this, you'll fi rst need to
tip the Juice Pitcher forward at a
slight angle, so that the lid's large
hole has some separation from the
spout, then you can slide out the
pitcher. This is the reverse of what
you did during assembly.
16
9
To stop juicing, press the speed
at which you are currently
juicing. To completely power o
the juicer, press the center power
button and wait for the Sieve to
stop spinning. Unplug the unit
after each use.
11
Immediately move the
Drip Spout cover downward
over the spout to avoid any
Juice
residual drips onto the unit
or onto the surface below the
juicer.
TIP:
We recommend using your
left hand to pull the Juice Pitcher
away, while using your right hand
No-Drip Spout
to swing the
down and over the spout opening.

Control panel

MULTI SPEED CONTROL PANEL
& JUICING SETTINGS
No-
cover
OFF:
Power is OFF. If the unit is ON,
the center power button will be
illuminated. Pressing the center
button will turn the unit OFF.
LOW:
Best for juicing softer fruits and
vegetables.
HIGH:
Best for harder produce like
pineapples.
TURBO:
Best for juicing the toughest
vegetables like beets or carrots.
17