Disassembly - NUTRIBULLET Juicer Pro Manual De Instrucciones

Disassembly

1
Ensure the unit is powered
"OFF" and unplugged.
3
Locking Handle
Unlock the
from the Basin Cover by
pulling the handle backward
out of the "ears" on either side
Basin Cover. Move the
of the
handle down.
22
2
Remove the pitcher from
under the spout. To prevent
No-Drip Spout
drips, use the
cover to close the juice spout.
4
Pulp Basin
Remove the from
the Motor Base by pulling
upwards with the Basin Cover
and Sieve still in place and
take it directly to your sink.
5
Food Pusher
Remove the by
lifting it out of the feed chute.
7
Sieve
Gently lift the vertically
out of the center of the Pulp
Basin. Clean the Sieve right
away (see care instructions).
6
Lift the Basin Cover vertically
o of the Pulp Basin and
remove any pulp from the
inside of the cover. You
may use the fl at end of the
Cleaning Brush
to scrape
pulp o of the cover.
8
Pulp Basin. Use
Empty the
Cleaning
the fl at end of the
Brush to easily scrape out the
pulp and set it aside for use in
other recipes or composting.
Or empty the pulp into your
waste bin or compost.
23