InFocus SimpleShare INA-SIMS1 Manual Del Usuario página 10

Using SimpleShare Transmitter for Extended Periods
5
Connect micro USB plug of charging cable to micro USB port of SimpleShare Transmitter.
Connect USB plug of charging cable of Simpl eShare Transmitter to an adapter or a USB port on source device.
Power on SimpleShare Transmitter will remain on but device will not charge.
4
Turn off Power Switch of SimpleShare Transmitter before removing the USB power cable system stability.
*Transmitter will be shut down by system if power is not turned off.
RF specification: 5180 MHz ~ 5220 MHz , 5745 MHz ~ 5825 MHz
Hardware Version: 0.1
Software Version: 17.1.24
Operating Temperature : 0C~40C
3
The screen in part may not transfer if the aspect ratio of source device does not match with that of the display
device.
Maximum range for wireless application may vary depending on the environment.
The wireless device in use may be subjected to radio interference during operation.
Turn power OFF when not in use.
This device comply with part15 of FCC rules. (FCC Part 15.19(a))
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device & its accessories must accept any interference received, including interference that may
cause undesired operation.
10
All manuals and user guides at all-guides.com