LUCKY FL068 Manual De Operaciones página 10

6. Fixing sonar sensor
6.1 Pull out the rubber stopper, adjust float so that it is18 to 22 cm
from the sensor, or at your desired depth.
Replace the rubber stopper by pressing it firmly into the float.
The Sensor float must be adjusted so that it is a minimum of 18 cm
away from the sensor.
6.2 Toss the sonar sensor and float assembly into water at your
desired fishing location.To toss, place the sonar sensor and float in
your hand, and pitch underhand. Do not throw the sensor by the
cable as this will cause unrepairable damage.
Before tossing, be certain that the cable is free from tangles and is
not wrapped around anything.
8