LUCKY FL068 Manual De Operaciones página 12

7. Fishing at the boat or ice
7.1.1 Toss the sensor and float into the water as per the previous instructions.
7.1.2 Attach the adapter to the boat hull using the mounting tabs.
7.1.3"shoot – Thru" the hull of a boat. Place the sonar sensor in 1 inches of water against the
hull bottom. Or coat the face of the sonar sensor with petroleum jelly and press it against the
hull bottom with a twisting motion.
NOTE: If depth readings appear as "---" while using one of these methods, place the sonar sensor
directly in the water to verity that the fish finder is operating properly. If it operates properly while
directly in the water, reposition the sensor in a new location in the hull,and repeat the methods in
above.
7.1.4 if it stilldoesn't work on all hulls and you may have to place the sensor directly in the water
for proper operation.
7.2 FISHING ON ICE
To achieve the best performance for ice fishing,it is highly recommended that you cut a hole
through the ice and place the sonar sensor directly in the water. If you would like to check
the area for depth or fish before cutting the hole.Clear away snow to expose the ice surface,
making sure the surface is smooth.Place a small amount of liquid water on the ice and setthe
sonar sensor on the water, allowing the unit to freeze to the ice.
10