Installing Magicwatch; Tools Required - Waeco MagicWatch MWE800 Instrucciones De Montaje Y De Uso

_MWE-800-4F.book Seite 37 Freitag, 21. Juli 2006 4:28 16
MagicWatch MWE800
The display provides the following control elements:
No. in
fig. 11, page 6
1
2
3
6

Installing MagicWatch

6.1

Tools required

For installation and assembly you require the following tools:
Drill bit set (see fig. 1.1, page 3)
Drill (see fig. 1.2, page 3)
Screwdriver (see fig. 1.3, page 3)
Set of ring or open-ended spanners (see fig. 1.4, page 3)
To make and test the electrical connection the following tools are required:
Diode test lamp (see fig. 1.5, page 3) or voltmeter (see fig. 1.6, page 3)
Crimping tool (see fig. 1.7, page 3)
Insulating tape (see fig. 1.8, page 3)
Cable bushing sleeves, if necessary
To fasten the control box and the cable you may require additional screws
and cable binders.
All manuals and user guides at all-guides.com
Meaning
Loudspeaker
Coloured LEDs
Button for switching the system on manually.
Pressing the button again will switch off the system.
Installing MagicWatch
37