Waeco MagicWatch MWE800 Instrucciones De Montaje Y De Uso página 41

_MWE-800-4F.book Seite 41 Freitag, 21. Juli 2006 4:28 16
MagicWatch MWE800
6.5 Fastening the display
When laying the display cable, ensure that:
They are not kinked or twisted,
They do not rub on edges,
They are not laid without protection in sharp edged ducts (see fig. 3,
page 4).
Note the following points when selecting a place to mount the display:
Mount the display in the area near the dashboard so that you are able to
look ahead and observe the display simultaneously when parking (see
fig. 18, page 8).
The display must be easily visible when you are driving forward.
The display must not be covered or damaged by any objects placed on
the dashboard.
Mount the display so that there is no danger of injury, if you have to sud-
denly brake sharply.
When positioning the display, make sure that it is not in the path of an
expanding airbag. This could cause injury if the airbag opens.
Mount the display in the proper direction! This is the case, when the cable
is faced downwards.
Caution!
Before making any drill holes, ensure that no electrical cables or
other parts of the vehicle can be damaged by drilling, sawing and
filing.
➤ Attach the display to the desired location with the supplied tape.
The plug's polarity cannot be reversed: It can be only be plugged
into the connection in one way.
➤ Insert the display plug into the socket of the control unit (fig. 10.1, page 6).
All manuals and user guides at all-guides.com
Installing MagicWatch
41