Elocity Menu - Chauvin Arnoux C.A 1052 Manual De Instrucciones

English
5.4 Velocity menu
When you access to the speed menu the next menu appears:
VELOCITY
Probe HOLD Config Avg
Rec. Params Airflow
See § 6 for function description
Hot- wire anemometry
When you connect a hot-wire probe, the screen shows its characteristics.
Carefully slide back the sensitive element protection sheath. Position the probe perpendicular to
the air flow => the red dot (located on the bottom of the probe) must face the air flow.
Press then on OK to enter in the menu hot-wire anemometry, the screen shows the measured values
in air velocity and in temperature, and the next menu appears.
Page 23