Sony LocationFree LF-PK1 Guia De Inicio Rapido página 18

Connect Your Computer to the Base
Station to Watch Video
1
Double click the
start LocationFree Player.
2
While the SETUP MODE LED is blinking, select
a Base Station from the list, choosing one with
a green icon, and then click [Connect].
Green icon
Note
If your Base Station does not appear on the [Base Station Selection]
screen, your security software or browser may be blocking the
communication between the LocationFree Player and the Base
Station. Refer to the instruction manuals of your security software
or the online help of your browser to configure them not to block the
communication.
14 (GB)
icon on the desktop to
3
If the SETUP MODE LED is not blinking, press
the SETUP MODE button again to switch to
Setup Mode (registration possible).
When the message "Registration completed. Select [OK] to
connect to the Base Station and start watching Video."
appears, click [OK].
Note
Make sure that the external device is turned on. Otherwise, you
may see no picture.