Changing the Screen Size
Screen sizeselectiondepends on the type of video input.
1.
Press the MENU button to display the menu.
Press the ENTER button to select "Picture".
2.
Press the A or T buttons to select "Size", then press the ENTER button.
3,
Press the A or T buttons to select the screen format you want.
Press the ENTER button.
Press the EXiT button to exit.
" 16:9: sets the picture t0 i_619_wi_de m ode.
.....................
' Zoom1 : Magnifies the Size of the picture on the screenl
• Zoom2 : Magnifies the size of the picture more than "Zoom1 '_.
,Wide
Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
; 4:3 : Sets the picture to 4i3 n0rma! model
"Just
Scan :Use the function to see the fu!l image without any cutoff
....
whe nHD
720p/! O 80 !s!g na!s are! n
.........
Alternately, you can press the P.SiZE button on the remote control repeatedly to
change the picture size.
>- If you watch a still image or the 4:3 mode for a long time (over 2 hours), an
image may be burned onto the screen. View the TV in 16:9 mode as much as possible.
>- HD (High Definition)
16:9 - 1080i (1920x1080), 720P (1280x720)
&MODE
S_]LL
RSIZE
16:9
Setsthe pictureto 16:9widemode.
Zoom1
The screen size when Wide screen
is vertically enlargea.
Zoom2_
The screen size when the
Zoom1 screen is vertically
enlarged
I
Wide Fit
4:3
Enlarges the aspecl ratio of
Sets the picture to 4:3
the picture to fit the entire
normal mode.
screen..
,tA_
J__ust Scan
Use the function to see the full
image without any cutoff when
HDMI 720pi1080i signals are
input.
>_ • In TV, VIDEO, S-VIDEO,and all COMPONENT (480i, 480p), DTV (480i, 480p) modes, all screen modes can be selected.
(16:9 • Zoom1 • Zoom2 • 4:3).
• You can select only the 16:9, 4:3 and Wide Fit screen sizes in the DTV (720p, 1080i), Component (720p, 1080i) or
HDMI (720p, 1080i) mode.
• In PC modes, only 16:9 & 4:3 modes can be selected.
• You must select Zoom with the R Size button on the remote if you want to move the Zoom 1or 2 picture up or down.
• When watching a DTV's HD signal, you can use Wide Fit. Horizontal zoom (Wide Fit) sets the optical picture format by
expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not
support all external devices (DVD, VCR etc.).