Portable Mode - SPC HESTIA Manual De Usuario

2.2 Portable mode

With this installation, you can use your thermostat in a portable
H E A T L I N K H E S T I A
≤ 100m
way, and you can put it in different rooms to find out their
temperature and turn on the heat based on these temperatures;
the heat link can be placed in the same place where you had your
old thermostat, or next to the boiler.
Take into account that the maximum distance between the
thermostat and heat link is 100 metres in the open air.
≤ 100m
H E A T L I N K H E S T I A
For this mode, the heat link must be connected to the electrical
network with the power cable and you will have to connect the
boiler cables directly to the heat link relay connector, so it can turn
the boiler on and off; before disconnecting your old thermostat,
note where each wire is connected in order to connect it in the same
way to the new thermostat (COM and NO on the connection box).
26