Device Control Options; Thermostat Control Options - SPC HESTIA Manual De Usuario

3. DEVICE CONTROL OPTIONS

3.1 Thermostat control options

BUTTON PRESSING BRIEFLY
Alternate between
programming mode and
manual mode.
Switch between viewing
the temperature you wish
to reach and the current one.
In the configuration
modes, press to confirm
the information and exit
the mode.
With the thermostat in
Standby (it will show OFF
on the display) or in power-
saving mode (the display
will be off) press for 1
second to turn it on again.
PRESSING AND HOLDING
(FOR 3 SECONDS)
Configure the adjustments
in programming mode (see
page 36).
Configure the date settings
(year, time, day and month),
pressing or to move
between settings to be
changed (use the arrows to
select the right date) and the
button to confirm and save
the settings.
With it turned on, press and
hold to go into Standby mode
(OFF will be shown on the
display).
28