Energy Saving - Lenco PR2700 Manual Del Usuario

4. Icon The blinking clock on the RDS symbol means that Th
blinks.
5. Actual PRESS and HOLD RDS/PLAY button has FM auto search and store function.
1. Press the FUNCTION bu
2. Press PLAY to pause the playback, press it again to resume playback.
3. Using the bu ons SKIP+/SKIP- to select next or previous track.
4. Press and hold SKIP+/SKIP- to
Programming
The device allow you to create a playlist of up to 20 tracks.
1. When USB playback is stopped press the MEMORY/ALARM b
2. When the playback stops, press the bu
3. Use the SKIP+/SKIP- bu
4. Press the MEMORY/ALAR
5. You can create a program of up to 20 tracks by repea ng steps 3 and 4.
6. Press the RDS/PLAY bu
NOTE:
- Compa ble storage device (up to 32GB).
- Please do NOT use a USB extension cable to connect your USB flash drive. Such cable can pick up addi
interference which can corrup
- Due to some USB drive manufacturer's non-compliance with the full USB 1.1/2.0 standard. A small
percentage (about 5%) of USB flash drive might not be
11. AUX IN
This allows you to connect an external player's sound through your unit.
1. Plug a 3.5mm audio cable (
IN Jack a e right o
2. The unit will automa ally enter AUX mode.
3. Start your external player to play music, The unit will outpu
check the volume level
4. To return to another mode,

12. ENERGY SAVING

Due to ErP stage two requirement and p
Au cally once no music has been playing over 15 minutes.
n un l display Show USB.
d/backward. When released normal playback will resume.
n Memory, The display flashes memory and P01 Appears.
ns to selec desired track.
n to store the selected track on the current
n to start playback
data flow.
cluded) into your external player's line out and the other end into the AUX
e unit.
oth units.
e audio cable from the unit
is automa cally updated eac
. The display memory
programmed list
e
sound. Note: when no sound can be heard,
nv ironment, the unit will switch to the standby mode
20
it
n flashes P01
n. The display will show P02.
nal