Sauder Harvey Park 420283 Manual De Instrucciones página 10

Step 6
Separate the EXTENSION SLIDES (2) from the EXTENSION RAILS (1) as shown in the diagram. Be
å
prepared; the parts are greasy.
Fasten two EXTENSION RAILS (1) to the LEFT END (B). Use six BLACK 1/2" PAN HEAD SCREWS (22).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the holes shown in the diagram. Then, slide the
å
inner cartridge of the EXTENSION RAIL in to fi nd the other two holes that line up with the holes in the
LEFT END. Turn the SCREWS into those holes.
NOTE: The EXTENSION SLIDES will be used later for the DRAWERS.
å
Turn twelve ANGLED HEAD CAM SCREWS (5) into the LEFT END (B).
å
Angled edge
Page 10
Use these holes.
1
5
B
Open end
www.sauder.com
Angled head
Push the black lever down and
pull the SLIDE from the RAIL.
BLACK 1/2" PAN HEAD SCREW
(6 used in this step)
1
Open end
2
22
1
420283