Battery Indicator - LawnMaster NPTGCP2617A Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
Lift the start button cover and press the start button
until the engine starts. Then immediately engage the
throttle safety and the throttle trigger to start the
trimmer.
To stop the trimmer: Press the STOP switch to the
stop position "O" until the trimmer stops (Fig. 20).

BATTERY INDICATOR

A battery indicator is located above the start button, and
can be used to indicate the battery status (Fig. 21).
When pushing the start button to start the engine, a
green light indicates a fully charged battery; a red light
indicates the battery needs to be charged.
HINT FOR OPTIMUM USE
In order to achieve optimum cutting results, only cut dry
grass.
TRIMMING
(See Fig. 22)
The engine housing can become hot when the trimmer is being used. Do not make contact with this
part of the tool during use and whilst it is still hot. When holding the trimmer, ensure all body parts
are clear of the engine housing. Contact with this part can result in burns or other serious injuries.
Always position the trimmer on your right side in order to reduce exposure to hot surfaces which can
cause possible serious injuries.
Keep the bottom of the engine below waist level during operation to avoid burns from hot surfaces.
Hold the grass trimmer firmly with both hands, keeping your right hand on the main handle and
left hand on the assist handle.
The trimmer should be held at a comfortable position with the rear handle at waist level (Fig.
22).
Keep your balance with your feet apart.
(See Fig. 21)
20
STOP
Battery
indicator
Fig. 20
Fig. 21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

26cc-2 cycle

Tabla de contenido