Symbols - LawnMaster NPTGCP2617A Manual Del Operador

SYMBOLS

Some of the following symbols may be used on this product. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the product better and safer.
SYMBOL
Volts
V
Amperes
A
Hertz
Hz
Watt
W
Hours
hrs
Per Minute
/min
No Load Speed
n
o
Alternating Current
Direct Current
Lithium-Ion Battery
Recycling
Safety Alert
Read The Operator's
Manual
Eye and Hearing
Protection
Gloves
Safety Footwear
50ft (15m)
Keep Bystanders Away
Ricochet
No Blade
Gasoline and Lubricant
NAME
Voltage
Current
Frequency (cycles per second)
Power
Time
Revolutions, strokes, surface speed, orbits etc., per
minute
Rational speed, at no load
Type of current
Type or a characteristic of current
Designates that this tool is in compliance with
Lithium-Ion battery recycling program requirements
Precaution that involves your safety.
You must read the operating instructions carefully.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1 along with hearing
protection when operating this equipment.
Wear non-slip, heavy-duty protective gloves when
handling this product.
Wear non-slip safety footwear when using this
product.
Keep all bystanders at least 50' (15 m) away.
Thrown objects can ricochet and result in personal
injury or property damage.
Do not install or use any type of blade on a product
displaying this symbol.
Use unleaded gasoline intended for motor vehicle use
with an octane rating of 87 [(R + M) / 2] or higher.
This product is powered by a 2-cycle engine and
requires pre-mixing gasoline and 2-cycle lubricant.
DESIGNATION/EXPLANATION
7