JVC KD-R680S Manual De Instrucciones página 24

INSTALLATION/CONNECTION
Installing the unit (in-dash mounting)
Orientate the trim plate as
illustrated before fitting.
When installing without the mounting sleeve
1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the vehicle mounting
bracket and secure the unit with screws (commercially available).
Use only the specified screws. Using wrong screws might damage the unit.
24
ENGLISH
Do the required wiring.
( 25)
Hook on the top side
Bend the appropriate tabs to
hold the sleeve firmly in place.
How to remove the unit
Part list for installation
(A) Faceplate
(B) Trim plate
Dashboard of your car
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key