Descargar Imprimir esta página

Listening To Music - Sony DR-BT30Q Manual De Instrucciones

Ocultar thumbs Ver también para DR-BT30Q:

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING THE UNIT

Listening to music

VOLUME – button
VOLUME + button
POWER button
>
Nx
.
Check the following before
operating the unit.
– The BLUETOOTH device is
turned on.
– Pairing of this unit and the
BLUETOOTH device is
complete.
– The BLUETOOTH device
supports the transmitting music
function (profile: A2DP).
1
Press and hold the
POWER button for
about 3 seconds while
the unit is turned off.
The indicator (blue) and
indicator (red) flash together
twice and the unit is turned on.
Note
Do not press and hold the POWER
button for more than 7 seconds,
otherwise pairing mode is entered.
2
Make the BLUETOOTH
connection (A2DP) from
a BLUETOOTH device to
this unit.
Refer to the operating
instructions supplied with the
BLUETOOTH device on how to
operate it.
3
Start playback on the
BLUETOOTH device.
Tip
BLUETOOTH connection of A2DP
(Advanced Audio Distribution Profile)
can also be operated with the jog switch
from this unit to the BLUETOOTH
device except when making a call on this
unit.
Note
When you play music by connecting the
unit to a BLUETOOTH device using HSP
(Headset Profile)*, sound quality will not
be high. For better sound, change the
BLUETOOTH connection to A2DP* by
operating the BLUETOOTH device.
* For detail on profiles, see page 23.
Continued
13
US

Publicidad

Capítulos

Solución de problemas

loading